Originally posted by enduro
View Post
Announcement
Collapse
No announcement yet.
Project Yellow
Collapse
X
-
Originally posted by rallyreturn View PostYour more than welcome to come and have a look, I might even know you as from your user name I guess your into offroading, sold my KTM 450 EXC to buy this shell. Was a Caerphilly club member.
Comment
-
There is a lot more work than I first thought on these rear arches. Rot covered over with patch panels and filler, cut it all out and made some new panels.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Comment
-
Cut out another patch plate covering rot, fabricated a new section and welded.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Panel has warped slightly but more filler to sought that out, besides this area is under the arches.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
This side is now more or less complete, time to start on the other side which is even worse than this side was.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Comment
-
Originally posted by rallyreturn View PostCut out another patch plate covering rot, fabricated a new section and welded.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Panel has warped slightly but more filler to sought that out, besides this area is under the arches.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
This side is now more or less complete, time to start on the other side which is even worse than this side was.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
are those wheel arch liners that are for wide archs fitting ok is there much mods to do m8?? did u get them af the fea bag e.bay ?dav
Comment
-
-
Made a start on the other side today, cut out loads of metal and cleaned up the turret area.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Just spent another couple of hundred pounds on parts, but stuck for time at the moment as work is very busy and I'll be away working in Ireland for a couple of Weeks at the end of next Month.
Comment
-
Managed to get a few hours in on the car today. Still working on the rear corner but coming along slowly.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
[IMG=http://img21.imageshack.us/img21/2668/dsc03719kk.jpg][/IMG]
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Comment
Comment