At last
YUE Rises again. New head on,New cam in,Air filters on,New plates on (Mike youngs),New rear quarter cards in, Exhaust fitted correctly
Using a standard pulley till Friday when John Wilcox sets it up with the vernier. After all the fretting and worrying about starting with the new head and cam, Fired first time
Ran at 2500-3000 revs for about 1/2 hour with no problems. Followers sound a little noisy as I set them slightly loose. Will have this sorted on Friday as well. Filled with crappy 20/50 for the run in. Flushed, drained then in went the good stuff with a new Ford Filter. (Duckhams Q 20/50).
Took the car for a little run, Pulls ok but can tell it needs a good set up. VERY noisy but in a good way
Altogether happy at last.




Had to put a pic up of the old plates on their new home

Did wash it afterwards as I was disgusted with how dirty it was....he he.


Using a standard pulley till Friday when John Wilcox sets it up with the vernier. After all the fretting and worrying about starting with the new head and cam, Fired first time

Took the car for a little run, Pulls ok but can tell it needs a good set up. VERY noisy but in a good way





Had to put a pic up of the old plates on their new home


Did wash it afterwards as I was disgusted with how dirty it was....he he.
Comment