Cibie Spots

[WooDooUK]

About to order some spot lamps. 2 spots 2 driving lamps, i have noticed that most peeps run supers (9") on the top and std Oscars (7") on the bottom. is this for a reson, or just personnal taste?

[Tim]

just down 2 taste, i had supers at the top and plus at the bottom

[WooDooUK]

Has anyone tried the Q/R Alloy Lamp brackets from Rally Design?

[M11RF]

How much are the brakets?
Rally Design stuff is renound for being shit, but some of their stuff is ok.

[WooDooUK]

£39.50 for a pair

http://www.rallydesign.co.uk/catalog/product_info.php?products_id=10433

[Tim]

i use brackets from west wales but they all pretty much look the same

[M11RF]

£39.50 for a pair

http://www.rallydesign.co.uk/catalog...ducts_id=10433

Think i'll order a pair of them

[WooDooUK]

Think i'll order a pair of them

hehe your not the only one. got a pair of these, 2 Super Oscar Driving lamps, 2 Super oscar spot lamps and 4 130W builbs on the way :compress:

now to find that thread with all the wiring digrams

EDIT That will be this one then http://bbs.fzr1000exup.org.uk/phpbb2...t=diagram+spot

[Frosticles]

Run 4 super oscars on mine. Also use a quick release bracket from Prepfab. Expensive at about £70 but superb quality. Make sure you use some steady's as well as they do bounce about a bit.

[Tim]

for steadys use a hose clip cut and half then u can adjust it

[Frosticles]

Can get the proper jobbies from any little accessory shop. Mine are Cosmic ones and look great.

[WooDooUK]

The alternator i have at the moment is a pretty beefy however i suspect that its on the way out. anyone got any recomended items that would power these 4x 130W bulbs?

My farther used to run a Rover SD1 alty on his mk1, anyone still do this?

[Frosticles]

Used to run a Rover V8 one as well. Used to do the job perfectly. No need now as mine arn't wired up.

[yellow peril]

frosty, you bloody con artist.......all show and no go...... :bom: mine are wired up to two switches inside as had them cut into main lights but alti went on strike and fuse box came out in simpathy
i prefer supers on the top and normals on bottom..... just my choice tho

[WooDooUK]

for steadys use a hose clip cut and half then u can adjust it

how do you attach the end of the jubilee clip to the back of the lamp?