0-62mph calculator

[Frosticles]

Shamelessly stolen from another site...........

http://www.letstorquebhp.com/calculator.asp

Here's mine........

Power at Flywheel (BHP) : 226
Weight without Driver (KG) : 950
Power to Weight Ratio (BHP Per Ton) : 241.71
0 - 60 (Secs) : 4.74
0 - 100 (Secs) : 11.93
60 - 100 (Secs) : 7.19
Quarter Mile (Secs) : 13.12
Terminal Speed (MPH) : 104.83
Drag Strip Quarter Mile (Secs) : 13.02
Drag Strip Terminal Speed (MPH) : 106.05

[mk1gaz]

Here's mine :
Power at Flywheel (BHP) : 228Weight without Driver (KG) : 950Power to Weight Ratio (BHP Per Ton) : 243.850 - 60 (Secs) : 4.710 - 100 (Secs) : 11.8460 - 100 (Secs) : 7.13Quarter Mile (Secs) : 13.08Terminal Speed (MPH) : 105.12Drag Strip Quarter Mile (Secs) : 12.98Drag Strip Terminal Speed (MPH) : 106.35







Pretty accurate as well as i've actually done 12.8secs at 109mph at Santa Pod a few times and tons of 12.9's and 13.0's . Obviously tyre choice makes a difference so the calculater looks to be set up for street rubber which is handy . I'll do my Fiat 600 project car next then and see what it says

[mk1gaz]

Fiat 600 Abarth with a 550bhp rotary turbo engine =



Power at Flywheel (BHP) : 550
Weight without Driver (KG) : 600
Power to Weight Ratio (BHP Per Ton) : 931.38
0 - 60 (Secs) : 2.73
0 - 100 (Secs) : 5.926
0 - 100 (Secs) : 3.18
Quarter Mile (Secs) : 10.78
Terminal Speed (MPH) : 135.00
Drag Strip Quarter Mile (Secs) : 10.68
Drag Strip Terminal Speed (MPH) : 136.57




Should be fun although it will be faster than that for sure

[SHIFTY]

lol thats pretty cool!
Was there not a calculator somewhere for diff ratio's on top speed?

[RS2000CUSTOM]

Was there not a calculator somewhere for diff ratio's on top speed?

Heres one I done earlier

http://www.rallyesportescorts.co.uk/maxmph.xls

[hotrs2000]

Here's mine

Power at Flywheel (BHP) : 167
Weight without Driver (KG) : 950
Power to Weight Ratio (BHP Per Ton) : 178.61
0 - 60 (Secs) : 6.05
0 - 100 (Secs) : 16.33
60 - 100 (Secs) : 10.28
Quarter Mile (Secs) : 14.48
Terminal Speed (MPH) : 94.16
Drag Strip Quarter Mile (Secs) : 14.38
Drag Strip Terminal Speed (MPH) : 95.25

Just a shame it all goes to pot when you add the fat middle aged driver

[SHIFTY]

Shamelessly stolen from another site...........

http://www.letstorquebhp.com/calculator.asp

Here's mine........

Power at Flywheel (BHP) : 226
Weight without Driver (KG) : 950
Power to Weight Ratio (BHP Per Ton) : 241.71
0 - 60 (Secs) : 4.74
0 - 100 (Secs) : 11.93
60 - 100 (Secs) : 7.19
Quarter Mile (Secs) : 13.12
Terminal Speed (MPH) : 104.83
Drag Strip Quarter Mile (Secs) : 13.02
Drag Strip Terminal Speed (MPH) : 106.05

Kev, what engine you running these days?
You still on the pinto?
Serious output if it is!

[Frosticles]

Kev, what engine you running these days?
You still on the pinto?
Serious output if it is!

HT 2.2 on 48's. Great when full throttle. Bag o bollox anything under. Needs de-tuning for road use

[SHIFTY]

HT 2.2 on 48's. Great when full throttle. Bag o bollox anything under. Needs de-tuning for road use

Sounds a belter mate!, thought it would have been something like that with that amount of poke!
Bet it sounds the buisness aswell!

[dustydog]

Shamelessly stolen from another site...........

http://www.letstorquebhp.com/calculator.asp

Here's mine........

Power at Flywheel (BHP) : 226
Weight without Driver (KG) : 950
Power to Weight Ratio (BHP Per Ton) : 241.71
0 - 60 (Secs) : 4.74
0 - 100 (Secs) : 11.93
60 - 100 (Secs) : 7.19
Quarter Mile (Secs) : 13.12
Terminal Speed (MPH) : 104.83
Drag Strip Quarter Mile (Secs) : 13.02
Drag Strip Terminal Speed (MPH) : 106.05

Thats slow is the handbrake stuck on

[Jon Segger]

Nice find

Here's mine....

Power at Flywheel (BHP) : 292
Weight without Driver (KG) : 908
Power to Weight Ratio (BHP Per Ton) : 326.75
0 - 60 (Secs) : 3.88
0 - 100 (Secs) : 9.37
60 - 100 (Secs) : 5.49
Quarter Mile (Secs) : 12.19
Terminal Speed (MPH) : 114.02
Drag Strip Quarter Mile (Secs) : 12.09
Drag Strip Terminal Speed (MPH) : 115.36

[Mikethepanel]

Heres my x-flow

Power at Flywheel (BHP) : 140
Weight without Driver (KG) : 1035
Power to Weight Ratio (BHP Per Ton) : 137.44
0 - 60 (Secs) : 7.62
0 - 100 (Secs) : 22.35
60 - 100 (Secs) : 14.73
Quarter Mile (Secs) : 16.08
Terminal Speed (MPH) : 84.82
Drag Strip Quarter Mile (Secs) : 15.98
Drag Strip Terminal Speed (MPH) : 85.80