Announcement

Collapse
No announcement yet.

Been on the rollers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Been on the rollers

    I was luckly enough to win a free rolling road session at Torque of the Devil in Uxbridge at the Oxford RSOC show this year so car was booked in this morning at 9am.

    Had trouble starting the old beast this morning but got it started and it was running like a right pig on the trip to TotD .

    Any how got the car there , car had only 115bhp on the 1st run so they set to work on setting up the 45's and timing and slowly the bhp started to rise .

    After 11/2 hours of tweaking the engine was putting out 164.8 bhp and 150lbs/ft peak torque , thats 20bhp more than when I was running the bikecarbs.

    The bikecarbs gave more low down torque between 2000 - 3000rpm but then flatted out, the 45's came into there own once the cam came on song and gave better torque from 3000rpm.

    I will put up the Dyno sheet tonight as I don't have a scanner at home but here is a couple on mobile phone vids




    Thanks to the Oxford RSOC for my prize

    my_car_in_the_vBGarage

  • #2
    so what was the main cause of the car running rough at the weekend, did they say, does it feel better, how big is your smile

    Comment


    • #3
      Great results from the Dyno. Bet it is running far better now
      Cheers

      Comment


      • #4
        Originally posted by taffr View Post
        so what was the main cause of the car running rough at the weekend, did they say, does it feel better, how big is your smile
        Carbs were all out of balance and set up all over the place, smile is on the large side

        Originally posted by smoov View Post
        Great results from the Dyno. Bet it is running far better now
        Running a lot better and not spitting back every 10 seconds now.

        my_car_in_the_vBGarage

        Comment


        • #5
          Sounds really nice Kieran
          cheeRS
          Ian
          sigpic


          "Live everyday as if it was your last, because one of these days, it will be."
          Jeremy Schwartz.

          "Better to burn out than fade away"

          Comment


          • #6
            nice happy ending

            Comment


            • #7
              Good stuff, great prize





              My cars in the VbGarage

              Comment


              • #8
                Top blokes at Torque of the Devil . They done my ECU mapping and nothing can keep up !!!!!!!!
                sigpic 2.1 ATMO YB POWER .
                Tick tock goes the clock and the clock don't lie .
                12.4sec to 109mph With NO turbo , NO gay trailer , NO slicks , NO gas , NO race fuel and NO bits missing . Beat that !!!!

                Comment


                • #9
                  sounds awsom, well done
                  AKA The Dipstick

                  Comment


                  • #10
                    Nic 1 m8 are you running a 2.1 ??
                    sigpic

                    Comment


                    • #11
                      Originally posted by npikey View Post
                      Nic 1 m8 are you running a 2.1 ??
                      Yes, its a Vulcan 2.1 160bhp spec engine so its bang on.

                      my_car_in_the_vBGarage

                      Comment


                      • #12
                        Nice one Kieran

                        CheeRS
                        Martin


                        Comment


                        • #13
                          nice one kieran, thats good output mate!!
                          sigpic

                          Comment


                          • #14
                            That's a great result, worth every penny.
                            sigpic

                            Comment


                            • #15
                              sounds sweet that well done.good figures there as well as there known as the brake horse power thiefs
                              sigpic

                              Comment

                              Working...
                              X