Nice motor you have there, its going to be a cracker when you have it done
Announcement
Collapse
No announcement yet.
Rapid Refresh Resto (RRR)
Collapse
X
-
Looking spot on, nice one
S.A.S Motorsport > http://bbs.rallyesportescorts.co.uk/...o=view&id=2408
Comment
-
Originally posted by Dobbo63 View PostAre aldrige Gona pay for your fuel Leon?? Or Donate the rear cards ?
Not as tho it's round corner from you is it .. Too much salt on the roads to take a nice motor like yours out ..
Steve.
Don't think they're contributing much tbh
But just wanted to get the damn things sorted
Any Idea when you're coming to look at mine?
Originally posted by RS mech View PostBlank on the cam box means it is machined from a round piece of steel not cast and then ground, as for machining required depends on engine speck and wether you have had your block decked!!
Originally posted by RS mech View PostForgot to say great looking motor worth persisting with will be really cool when you have finished!!
Originally posted by HarrierTony View PostNice motor you have there, its going to be a cracker when you have it done
Originally posted by SHIFTY View PostLooking spot on, nice one
Comment
-
Well been to Noble Motorsports to get the Car set up & RR Tuned with having the New Cam & Manifold + Exhaust etc.
But.......................Fuel Pumps not holding pressure now so they can't jet it otherwise when I change the Pump they'd have to do it all again & charge me obviously
It's safe to use, it's not lean at the top end, so that's the next thing to buy & take it back next week hopefully
Anyway got the Engine Bay looking more like it now.........
Got rid of the wiring & utilised the Existing Washer Bottle Bracket but in a different position & made a Bracket to fit to the New Strut Brace Bolt. Bracket needs taking off again & Painting but I'll have to do that at a later date
Started on the Soundproofing
Got Drivers door done & Card back on but forgot to take a Photo of the Process so I'll do that for the Passenger side
Got the Floor under the Rear Seat Squab & Seat Back done & the Rear Seat back in place for this weekend but it'll have to come out again for the Rear Panel Cards to be fitted, when I get them sorted
I'm using the Silent Coat Brand............must say the Alu Mat is quite Heavy
I've prob added 10 KGs to the Vehicle + the 5 Speed Gearbox is a lot heavier & the Strut Brace....................gonna need a Turbo next
Redid the 2.1 Badges as they weren't straight & the spacing wasn't quite right.
Comment
-
Originally posted by gixer1000 View PostI am hopefully going to the Malton meet next sunday,If i see you there,i will catch up with you,Regards gixer1000.
Are you going in the 2 thou?
I normally park in the Mini Dealership on the Main Road
Comment
-
Well I didn't make it to Malton in the Mex but went in the Focus instead
Now the TCA Bushes have decided to go to mush
They're only 9 months old & have only done approx 2.5k
I did get the Front Door Cards on, New Inner Door Window Seals, New Seats, re-fitted the Centre Console etc etc.
So I need to sort:
The Fuel Pump. I'm gonna check the Filter on it & the Filter King Filter before buying a new un.
TCA Bushes
Fit a Thermostat as it's never had one fitted for some reason
RR Tune up
MOT on 21st this month
Then Hopefully all will be done apart from fitting the sound proofing to the Carpeted Area.
Comment
-
Originally posted by Xelr8 View PostYeah I'll hopefully be in the Mex as long as the Weather behaves
Are you going in the 2 thou?
I normally park in the Mini Dealership on the Main Road
Comment
-
Originally posted by gixer1000 View PostHello Leon,we didnt get there till late,but there was a little bit of bother,a mustang decided to plant itself into the trees opposite the bmw garage,the RS2 is still in pieces.Regards gixer1000.
http://www.youtube.com/watch?v=raW7Q...ature=youtu.be
It seemed harder to do what he did than just drive by lol
Comment
Comment