X Pack Black

[richy c]

page 8 in this section , trolls restoration?

[Dave1800BDA]

We have started major restoration on this.

Pictures to follow....over the next few months.

Mike has some cracking parts to fit this up when finished,,,,will be one of the best mk2 x packs left.
Will update asap.

cant be alot to do darran, i thought it was a case of just bolting the good bits back on

look forward to the updates

[Br0nze M0nkey]

You wait until you see the pictures later this week, then you'll realise just how far back we have had to go!

[Darran]

mk2

cant be alot to do darran, i thought it was a case of just bolting the good bits back on

look forward to the updates

It was welded up,,,but shocking at the standard

[grum]

richy, didn't realise your welding was "shocking" ?

[0630154]

we need photos to look at.

[richy c]

blimey i didnt realize it was that bad. it was done to be used ,not concourse, just tidy when painted up. very cheaply, none profit made by me the wings were only tacked on when i left it with mark.i thought it was ready to put back, all bar a few bits here and there.but i guess if you start picking its easy to say what happened here etc.are all the wheel wells no good either?the heater bowl area was none existent,the sills were gone,and the floors were gone.we replaced the strut tops with big hole type so as he could fit roller tops,surely if you wanted a top concourse type car this wasnt the one for you.obviously if has gone to a professional restorer its going to get picked to death,as im an underseal type escort man

[Darran]

mk2.

I don't want to upset anyone!!

Just a job to us that were putting right!!

Mark will get the pictures up asap

[richy c]

just looked at the resto thread, jeeps it was 2006 it was started

[Darran]

mk2.

just looked at the resto thread, jeeps it was 2006 it was started

Be good for it to get back on the road.
Its on the jig at the mo.

[richy c]

Be good for it to get back on the road.
Its on the jig at the mo.

now your just showing off

[Darran]

mk2



Here's the bulkhead and front floor etc. after is been cleaned

The floor/sills/"a" posted/bulkhead etc all very poor.

Gearbox tunnel badly converted to 5 speed.

Welding for rollcage mounts and steering brackets!!!!

Hope you can see more about what the owner has here.

[richy c]

steering and roll cage bits not me. floors yes.

[graham John]

richy, didn't realise your welding was "shocking" ?

with kidney stones and a dislocated shoulder what do you expect..........







we all know Grums 'wiring' is shocking, quite literally




cheeRS

[Darran]

mk2.

This is straight from cleaning consultants. stripped the x-pack as well.