ALANS MK1 ESCORT

[south west restorations]

hey

looking well there m8 .
keep up the good work
and more pics.....

[alancdavis]

Guess you need to see what fittings you get with pump and regulator and go from there. Id say they will most likely be 8mm

What fuel preasure should I be looking at ?? Will a 7 to 9 psi be ok ??

[GraemeJ]

No!!! you want between 2 and 3 psi for carbs.

[alancdavis]

http://cgi.ebay.co.uk/FACET-Electric-Fuel-Pump-Fast-Road-Solid-State-150-BHP-/280237453314?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item413f743002

How about some thing like this ??

[alancdavis]

Or this ?????

http://cgi.ebay.co.uk/FUEL-PUMP-FACET-SILVER-TOP-FAST-ROAD-UP-150-BHP-NEW-/360261800035?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53e146d063

[alancdavis]

Last minute advice before I buy

[GraemeJ]

Either will be fine, but you will need a regulator also

[alancdavis]

I AM THINKING THE NEXT THING ON THE LIST WILL BE A bda CAM COVER THAT SITS ON TOP OF THE EXISTING zETEC COVER

Has any on fit this item and has anyone got some pictures ??

GOT to fix this BLoOdy caP loCK

[alancdavis]

No one fit one of these ??

[hally]

yep ive got one!

[hally]

Could do with advice as to the best fuel pump set up for my Zetec running twin 45 webbers

Thought of twin pumps in parrellel to actas a back up and move the filter and pressure reg from under the bonnet to the boot

Any advice will be welcome

you can use a facet solid state pump they are low pressure and you dont need to use a regulator!

[alancdavis]

yep ive got one!

Any chance of a photo ????? Please

[SHIFTY]

Any chance of a photo ????? Please

Im still waiting to see a pic of his engine bay
Get some foties up hally mate!

[alancdavis]

Have done any thing for ages with being away

Time to fit the new window rubbers






Glad to find no rust behind the old rubbers

[alancdavis]

I have decided to replace the door rubbers on the car and so I have a question,,,

I read some where on here that after fitting the new door seals it has been found that it is difficult to close the door....How can I avoid this ?? and who sells the best replacement seals ??
thanks