Announcement

Collapse
No announcement yet.

handbrake dust boot covers in polyurathane

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • handbrake dust boot covers in polyurathane

    hi there would members be interested in buying if this item was remade, i am contacting flo-flex who make bushes www.flowflex.co.uk richard the owner wants me to send a pair which a member is willing to do at moment am waiting for more info it seems they could be remade in black ithink richard wants to see response to idear cheeRS rob. hanbrake dust boot covers mk2 escort.

  • #2
    good luck, nice item to have done, would have thought many would have split by know

    MK2 member 091, RSOC member 2675, RS18 No 001, HRE7724 /50

    My Car in the VbGarage and in My Album

    Comment


    • #3
      These are available from rimmer bros at chester
      if you get them for a triumph stag and turn them inside out they are nearly the same item.
      I had them for my last resto and they are only a couple of quid

      Don't fall off your bike.... It Hurts

      Comment


      • #4
        remade better last forever.

        hi there i found they did not last split on rim, would you buy original looking pair in polyathane and black, owner of flo- flx seems keen to make these i have to send a pair for him to copy so dave1800bda helping me out , cheeRS rob.

        Comment


        • #5
          remade hanbrake rubbers

          flo-flex will make some examples to test

          Comment


          • #6
            hanbrake rubbers remade in poly.

            flo-flex will make a few examples in black to test

            Comment


            • #7
              Err, aren't the Escort ones different to the pictured Stag ones? Not going out to the garage now, but I think they have several convolutions on the bellows as the handbrake lever is at 90° to the backplate.

              If you're getting any done, there's no point in reproducing the Stag ones

              Comment


              • #8
                Originally posted by dasadrew View Post
                Err, aren't the Escort ones different to the pictured Stag ones? Not going out to the garage now, but I think they have several convolutions on the bellows as the handbrake lever is at 90° to the backplate.

                If you're getting any done, there's no point in reproducing the Stag ones
                hi andrew, the pic i put up is how i took them out of the Ford packet, the other set i had i fitted to the car, they were the same and in a similar packet, the dust boot does find its own angle when fitted

                hope they are right



                MK2 member 091, RSOC member 2675, RS18 No 001, HRE7724 /50

                My Car in the VbGarage and in My Album

                Comment


                • #9
                  I'll check mine later on the car - I have it in my mind that they are different, but it may be my age playing tricks!!

                  Comment

                  Working...
                  X