SKC is alive !!

[RS2000CUSTOM]

Got engine running today

Here is an mp4 video

http://www.fzr1000exup.org.uk/running.mp4

I havnt got a convertor to make it a wmv file but if you can play video - enjoy !!

[Tim]

might finaly get 2 see SKC then

[GAZ W]

****in nice one dave

at last

[oggie snr]

be good to see her this weekend dave will you get that big bbq in the boot m8

[RS2000CUSTOM]

be good to see her this weekend dave will you get that big bbq in the boot m8

Not left enough time for a shake-down to drive to Billing

SKC will be on my truck

Wilf and Lee will bring the BBQ

I will be off to Mr Kapoor's on Saturday for some Indian specialities

[kidz]

Nice one Dave, what modifications did you have to make to get the 2 and 1/4 " ashley exhaust manifold in !!

Also did you fit an ashley system from the manifold back ?

If so, what was the fitment like ...

Cheers

Andy

[RS2000CUSTOM]

Nice one Dave, what modifications did you have to make to get the 2 and 1/4 " ashley exhaust manifold in !!

Also did you fit an ashley system from the manifold back ?

If so, what was the fitment like ...

Cheers

Andy

No exhaust on yet but have test fitted the manifold.

I had to use a mini-da grinder to remove a small amount of the metal off the brake tower (apprx 10mm x 35mm long)

Also a small amount of the world cup X member mount had to be ground off to give clearance

No real problem though

Rest of the exhaust looks like it will fit ok with only minor "adjusting"

[GAZ W]

No exhaust on yet but have test fitted the manifold.

I had to use a mini-da grinder to remove a small amount of the metal off the brake tower (apprx 10mm x 35mm long)

Also a small amount of the world cup X member mount had to be ground off to give clearance

No real problem though

Rest of the exhaust looks like it will fit ok with only minor "adjusting"

Only noisy days for now then dave on the track days...lol

[Mex 1t]

No exhaust on yet but have test fitted the manifold.

I had to use a mini-da grinder to remove a small amount of the metal off the brake tower (apprx 10mm x 35mm long)

Also a small amount of the world cup X member mount had to be ground off to give clearance

No real problem though

Rest of the exhaust looks like it will fit ok with only minor "adjusting"

i like minor adjusting more like rework the feckin system

[RS2000CUSTOM]

Only noisy days for now then dave on the track days...lol

Hope not Gaz !!

I have had the 2 box system and Spencer Ashley has assured me it will be quiet enough

If not I know where their factory is and I wont use KY !! - lol lol lol

[topaz]

ellis says dont forget his breakfast

[RS2000CUSTOM]

ellis says dont forget his breakfast

[lee bishop]

so now it sounds like a tractor, to go with the looks...........

[RS2000CUSTOM]

so now it sounds like a tractor, to go with the XPT looks...........

Make a good engine for Deepest Blue to put into XPT

At the moment with no exhaust it is a bit John Deere like

[lathamescortmk2]

Hope not Gaz !!

I have had the 2 box system and Spencer Ashley has assured me it will be quiet enough

If not I know where their factory is and I wont use KY !! - lol lol lol

ill pass the message on dave.

ive got your exhaust right here, when you coming for it?