And again LOL

[Frosticles]

Decided to do a little fabrication today






Just need to rub the Seam Sealer down a little then all done for this side.

[taffr]

Decided to do a little fabrication today

please don't do any more son

[Dave1800BDA]

please don't do any more son

not keen on Artex either Taff

[taffr]

not keen on Artex either Taff

what next, woodchip paper

[RUDDY]

Son, please take this the right way.

Get that seam sealer taken off now it looks shite.

Get some etch primer on that bare metal and get a proper spray sealer if you must cover things up

[Frosticles]

Son, please take this the right way.

Get that seam sealer taken off now it looks shite.

Get some etch primer on that bare metal and get a proper spray sealer if you must cover things up

LOL. Seam sealer is a little on the "Spikey" side. Does sand down nicely though. Have taken your advice and bought some Upol acid 8

[graham John]

Have taken your advice and bought some Upol acid 8

is'nt that Hair restorer

cheeRS

[rsjohn1]

eh?

Rub down seam sealer am i dreaming or is the frost talking where the sun aint shining and is that a weld or chewing gum

Can I have my coat please!

regards john

[grum]

this will cover it all up son ................... now get it up NEC

[paul spence]

looks good ,,ive found the tool frosty put the sealer on with!!!!

[bigjohnie]

Son, please take this the right way.

Get that seam sealer taken off now it looks shite.

Get some etch primer on that bare metal and get a proper spray sealer if you must cover things up

agreed or leave it to a proffesional kev

[Frosticles]

Will post the new "Improved" version later......

[bigjohnie]

Will post the new "Improved" version later......

cant wait mate

[Tim]

Will post the new "Improved" version later......

get the local smart repairer to come around

[Frosticles]

get the local smart repairer to come around

Shut it, TIT