And again LOL

[Frosticles]

DID U HAVE ONE IN YER NOB SON ?? bet it was a small one

Had a ring in there

[graham John]

Had a ring on there

cheeRS

[Frosticles]

Hmmmmmmmmmmmmm, May have bitten off more than I can chew here LOL "Still" stripping the underside of paint which I said I would never do again as I hate that job SOOOOOOO much!!!!! Going back to bare metal as well. Only 3 1/2 weeks to go till the NEC.

[Chesney]

why????

[taffr]

what tools and products are you using to get it back to bare metal kev???

have to aggree, shite job, especially on your back in the garage

[graham John]

kev, there are easier ways to strip the paint from the underside.

why not just take the car back up to Donington for a few laps....


cheeRS

[Frosticles]

why????

Cause I do things properly son. Anyway, needs to be up to the standard I need it to be for next years shows.

what tools and products are you using to get it back to bare metal kev???

have to aggree, shite job, especially on your back in the garage

So far, using Wire wheels on a drill (Various) Soaked in thinners when they get clogged up then blown through with an airline Flat blade screwdrivers for the hard to reach spots, Diesel and a stiff brush, More thinners. Copious ammounts of shower gel "Did" have a roll over jig untill I sold it to Rodders a couple of months ago......

kev, there are easier ways to strip the paint from the underside.

why not just take the car back up to Donington for a few laps....


cheeRS

Like to do things the hard way G

[Dave1800BDA]

good luck in the next 3 weeks kev, always here if you need to talk

[Frosticles]

good luck in the next 3 weeks kev, always here if you need to talk

Plenty of that son

[grum]

good luck in the next 3 weeks kev, always here if you need to talk

didnt know you were with the Samaritans Dave

[Dave1800BDA]

didnt know you were with the Samaritans Dave

i like to listen and help where needed

snigger

[Frosticles]

Just got in from stripping the O/SF wheel arch/inner wing. Still not done and had enough.

[GAZ W]

This is exactly why i wont use mine in the rain etc...I only want to do mine just the once , you did yours a few years back used it and now you want to do it again

People may call you gay and a puff etc for not using it in the wet , but just think how hard it is to get it clean again

[RS2000EXPRESS]

Kev I was working on mine all last winter, which was only stripping down then repainting the back axle and rear suspension. Winters only around the corner so you need to give yourself more time and not make it a miserable job because of deadlines.

[paul spence]

is that a couple of hairs on the floor???? or have they just fallen out of the wire brush