PDA

View Full Version : who can make this into a siggy sized pic?

GAZ W
25-03-2005, 21:12
as title

http://img.photobucket.com/albums/0603/gaggler/crapi2.jpg


cheers
M11RF
25-03-2005, 21:29
Any Good??

http://img.photobucket.com/albums/v11/M11RF/crapi2.jpg
GAZ W
25-03-2005, 21:31
spot on mate :cheers:
M11RF
25-03-2005, 21:42
Not really sure what you want Gaz... But...


http://img.photobucket.com/albums/v11/M11RF/e311e080.jpg
GAZ W
25-03-2005, 21:46
just the blank pic will do

now can you make my siggy pic and that one into 1 picture?
paul spence
25-03-2005, 21:49
is the capri on the road now Gaz?
GAZ W
25-03-2005, 21:51
not yet paul , its running again now though, just still needs an mot , dirt cheap insurance and tax
paul spence
25-03-2005, 21:55
Wot you ganna de with it?you selliing the pug and use it everyday? :cat:
GAZ W
25-03-2005, 21:58
keeping the pug , for me everyday car ,capri for semi everyday car and the escort for the nice days
Frosticles
25-03-2005, 22:22
Posh git. :faroah:
M11RF
25-03-2005, 22:40
HOWZAT!
I`m not too clever on photo shop, but there ya go... :cheers:

http://img.photobucket.com/albums/v11/M11RF/gazw_.jpg
Banishit
25-03-2005, 23:15
had a wee go myself quickly too

http://www.redslate.co.uk/upload/pics/gazwsigpic.jpg

heres the code for it to copy if you want

[img]http://www.redslate.co.uk/upload/pics/gazwsigpic.jpg[/img]
GAZ W
25-03-2005, 23:32
thanks chaps

gone with the 2 picture one as the 3 pic one went off the screen :cheers:
Banishit
25-03-2005, 23:38
resized it down to 680 pixels wide, if it goes off screen now you must ahve your monitor set really low ? or a small 15" monitor ?
Chesney
26-03-2005, 07:53
think the 3 pic looks better mate.
Frosticles
26-03-2005, 17:21
3 pics here as well Gaz. :cheers:
M11RF
26-03-2005, 17:32
3 pics here as well Gaz. :cheers:

:mumum: :mumum: :mumum: :mumum:

angry9:

hehehe... told you i wasn`t very good!! :geek:
At least Gaz in on my side :cheers:
Frosticles
26-03-2005, 17:33
No offence..............he he. Fancy a hand in wiring?
M11RF
26-03-2005, 17:36
YES PLEASE!!

Nah... its all done now, just needs a bit of tidying up... You any good at that Kev?

After you`ve had a can of Fosters?? :laughing6:
Frosticles
26-03-2005, 17:38
Burp :drunken: on can number 3 now :cheers: Was asking for your help actually.................. Still can't figure out 2 wires. Done this a hundred times before but have brain lock as to this one.
M11RF
26-03-2005, 17:44
Whats wrong mate... i`ll consult my notes and see if i can help you :cheers:
Frosticles
26-03-2005, 17:47
Think there has been some sort of coil cut off installed but not sure. Looks like one that I have done in the past (Not to this car). Also there's the blue wire that used to go to the Ballast resistor? Don't need that anymore so tempted to chop it off?
M11RF
26-03-2005, 18:03
hmmmm... not too sure mate.
My loom is chopped to bits so i can`t really offer much advice there.
Best bet is to run an ign live to the + side of the coil and do away with the ballast resistor. Its unsightly and adds too much weight to the car :geek:
After all, its only protecting the coil, they are 2 a penny and fitted in 2 mins.
But as for the colours... like i said...??????
Not much help i know!!