PDA

View Full Version : Nearly there...


RS2kSX
01-06-2008, 19:02
Another setback, Seatbelts won't fir with roll cage fitted....

Wheel offset now resolved with ex-long studs & 1" spacer
http://i304.photobucket.com/albums/nn174/RS2kSX/P6010005.jpg
http://i304.photobucket.com/albums/nn174/RS2kSX/P6010006.jpg

Lights now fitted and working with new wiring (twin outer lights)
http://i304.photobucket.com/albums/nn174/RS2kSX/P6010007.jpg

Brakes set up so now ther don't stay on...

handbrake to finish & harnesses to fit then Mot


Proper interior still not ready and may be another month...:(

Missed santa pod and another dead line so maybe Beds owners club in three weeks.

http://i304.photobucket.com/albums/nn174/RS2kSX/P6010002.jpg

oldskooljoe
01-06-2008, 19:26
looking good now:) keep it up !

Martin
01-06-2008, 19:28
Looking good. :cool:

Looks like Taffr's but on steroids :D :D

RS2kSX
01-06-2008, 19:39
Re-striping next week, only got drivers seat in now, passenger side runners were Fuxxed, all original interior is still at shop waiting to be started (he's a very busy man...)

got it running a bit better, air screws were right in so kept flooding on tickover!!!

exhast is a bit lox and scrapes over drive so she may have to go up a bit.

Banishit
01-06-2008, 21:00
looking well that mate, must be nice to be nearly done

DazRS2K
01-06-2008, 21:03
Looks very sharp, Nice one ;)

marky4
01-06-2008, 21:17
nearly there :) well done m8;)
looks great :cool: :cool:

johnylock
01-06-2008, 21:22
looks good mate ! well done :cool:

Aled
01-06-2008, 22:07
Looks terrific.....well done m8...can't wait to see it :)

stu37025
01-06-2008, 22:10
Nice :cool: :cool:

Nipper
02-06-2008, 03:39
Keep at it ;) . I think it looks fanatastic :cool: :cool: .

enduro
02-06-2008, 06:41
Looking good. :cool:

Looks like Taffr's but on steroids :D :D
lol!!!! looks very nice.

Hoogi
02-06-2008, 07:51
Great Car...........:salute:

Andyc
02-06-2008, 08:00
looks very nice xpax are the best

RS2kSX
06-06-2008, 20:33
After numerouse problems getting the engin to run properly it's discovered plugs 1 & 2 are touching the piston if screwed in with electrodes facing up,
another set of plugs then...

now runns a lot sweeter
http://i304.photobucket.com/albums/nn174/RS2kSX/P6060031.jpg
Left original
center Platinum
right AR8 ??

RS2kSX
08-06-2008, 22:06
after another day on the car things are drawering to a close.

all that's left now is to wire the number plate light up and givre her a clean.

then it's down for an Mot test!!!!!!!

will she won't she???:confused:

Mogsmex
08-06-2008, 22:35
I'm sure she will :)

first show at Avo day ?


good luck with the MOT

yellowxpack
08-06-2008, 23:28
Good luck for the MOT! :)

marky4
09-06-2008, 05:50
good luck but i'm sure it will pass;)

Andyc
09-06-2008, 06:13
All the best for mot can not wait to see her in the flesh

Martin
09-06-2008, 07:29
Good luck with the MOT, sure she will fly through.

Hope to see you at AVO next weekend :)

RS2kSX
11-06-2008, 10:21
you heard it hear first,
It's passed....
It's taxed and will be annoying the locals asap

Beds meeting on Monday just needs a clean
http://i304.photobucket.com/albums/nn174/RS2kSX/P6110032.jpg
:):):):):):):):):):):):):):):):):):):):):):):):):) :):):):):):):)

stu37025
11-06-2008, 11:13
Good news!!:wav: Looks awsome! :thumbright:

RS2kSX
11-06-2008, 12:18
Did anybody notice ther stripes & position????

still out on that one:confused:

RS2kSX
11-06-2008, 12:25
not back home an hour and the scrap men have been round, ist it original? do you wanna sell it? is the 4dr yours as well? do you wanna sell it?????

:mad:

taffr
11-06-2008, 12:40
i'm lookin forward to seeing this one :bounce:

andym
11-06-2008, 13:12
Good news...... Just put some miles on it now....:D

graham John
11-06-2008, 13:17
bet youre super happy :)

well done


cheeRS

paul spence
11-06-2008, 13:39
nice one:)

ebj60t
11-06-2008, 15:28
you heard it hear first,
It's passed....
It's taxed and will be annoying the locals asap

Beds meeting on Monday just needs a clean
http://i304.photobucket.com/albums/nn174/RS2kSX/P6110032.jpg
:):):):):):):):):):):):):):):):):):):):):):):):):) :):):):):):):)
Did it pass with the black plates on??

lee bishop
11-06-2008, 15:39
congratulations !! look foreward to copping a feel too ;)

Nipper
11-06-2008, 16:19
Excellent news :D . Lookin great :cool:

RS2kSX
11-06-2008, 16:51
number plates and plate light!!! hiden behind bumper, don't do much illuminating...:rolleyes:

wiggyrs
11-06-2008, 17:08
Nice one

jlf1970
11-06-2008, 17:41
Nice one mate,

now enjoy :D

grum
11-06-2008, 19:05
well done

another one joins the fold
:rolleyes:

RS2kSX
11-06-2008, 22:48
Now it's on the road i'd like to say thanks to all and whenever possible i'd like to meet you all at the shows (now i have a car to go in)

so please make yourselves known and thanks again:jester:

marky4
12-06-2008, 05:48
great news :) :)

RS2kSX
13-06-2008, 07:26
Been out in it yesterday, in the rain...
engine is very lumpy, not running quite right yet but enough to get by with
handles quite well just got to play with shock settings and tracking

brakes are bloody good (realy shows how bad the 4dr ones are lol)

It's wierd, everybody looks at it as you go past, if i park it up people stand by it and just look at it
;)

Martin
13-06-2008, 07:28
Great news, car looks good :cool:

morcheen
14-06-2008, 10:10
is that keith i see in the workshop ?;) he has some tasty toys hidden away :D

RS2kSX
14-06-2008, 12:18
No, Paul (the local Mot tester) Top Gear:) in Letchworth

docscars
15-06-2008, 20:48
looking really well gerat to get it out and drive it :D

RS2kSX
16-06-2008, 16:53
got the stripes re-fitted today, much better now, goto logo on front wings as a 3bee

first main outing tonight, Beds RSOC
http://i304.photobucket.com/albums/nn174/RS2kSX/P1010003.jpg
http://i304.photobucket.com/albums/nn174/RS2kSX/P1010001.jpg

RS2kSX
07-07-2008, 20:35
Nearly there....

Rolling road finished today, they'll only say its 100% better than before.
i can collect tomorrow afternoon ater they set tracking/camber

faults found:-
blocked float chamber on 1st carb
fuel pressure too high
carb gaskets x2 ripped new set fitted with spring washers
timing 20deg out
cam timing out
cam rollower (1x) set with no gap
new battery is SH*T needs replacing
Ashley exhast blowing on lower joint (get gassed when playing in engine bay)


if everythings ok i'll be taking it to essex meet tomorrow:occasion5:

marky4
07-07-2008, 20:44
nice one glad it's nearly all done ;) :)

RS2kSX
08-07-2008, 17:01
Collected the beast today, running a little high on tickover but it drives so much better now, may need to get a rev limiter....

gotta be booked in again he's not happy the engine's tight and not run in yet, do some miles loosen it up a bit and then re-test it.

he wont give me a power figure as yet coz he's not finished with it

total cost so far????

£85.00

inc carb seals & squish washers.

so, i'm off do Essex tonight an see how she does on a run:):):):):):)

SHIFTY
08-07-2008, 18:29
Well smart! :cool:
Love the colour :cool:

stu37025
08-07-2008, 20:33
Nice looking car mate, sits nice and the wheels fill the arches well, cool car :cool: :thumbright:

vinny
08-07-2008, 21:13
got the stripes re-fitted today, much better now, goto logo on front wings as a 3bee

first main outing tonight, Beds RSOC
http://i304.photobucket.com/albums/nn174/RS2kSX/P1010003.jpg
http://i304.photobucket.com/albums/nn174/RS2kSX/P1010001.jpg

looks lovely in the pics, funny really but i think yours and taffs look lovely in beige :eek:

RS2kSX
08-07-2008, 22:37
Just got back, great night, good run both ways

sits well at 80ish, may have a problem with starter motor not dissengaging and clutch pedal went a bit tight but went back after 5 min driving!!!!

fuel not too bad either so now just gotta put some miles on it:):):):):)

richy c
09-07-2008, 16:06
the clutch cable's not getting hot is it? car looks really good:)

RS2kSX
09-07-2008, 22:30
clutch cable definatley sticking.
keep prodding it before starting and it free's up.

what's best to lube up, WD40/Gear oil?