PDA

View Full Version : BRAKE PIPE CLIPS

scoobydoo
28-09-2004, 18:51
Does anyone have a photo of the clips that hold the brake pipe near to the o/s chassis leg
bigjohnie
28-09-2004, 23:33
no but i should have some if you need them
dasadrew
29-09-2004, 06:36
Am I missing out on something? On mine the flex hose goes from inner wing to a welded on bracket on the strut. From there a brake line goes straight to the caliper.

What are these clips? Photo?
Banishit
29-09-2004, 07:10
o/s chassis leg not the suspension leg :geek:

hope that clears it up ?

Brian
dasadrew
29-09-2004, 17:46
Doh!! again. That's two down to you, Brian! So it's those metal clips which are always covered in underseal and general s**t dating back to the jurassic period!

Didn't know they were called 'legs' - thought they were 'rails'. Thought legs are vertical bits - 'cept after a few bottles of red wine!
Banishit
29-09-2004, 17:53
i would have called them chassis rails too mate :cheers:
scoobydoo
29-09-2004, 19:16
Thanks for the reply's but too explain i got the car in lots of pieces i.e. boxes and now when its time too put it together it's like a jigsaw.
RS2000CHRIS
29-09-2004, 20:13
I too am in the same boat as you scoobydoo,I am hoping to start putting my brake pipes on at the weekend so some pics would be good of the cips and positioning of the clips.Are new clips avalible?
Banishit
29-09-2004, 20:30
will get some from the manual tonight for you both
scoobydoo
29-09-2004, 22:35
Cheers mate
dasadrew
29-09-2004, 22:44
bloody hell, Brian! You've got a manual?!!!! Send it to GazW, quick!
Banishit
29-09-2004, 23:50
i will need to go to the car tomorrow as they are not shown in the Manuel (that great spanish waiter)
Banishit
30-09-2004, 18:08
right heres what I have sorry for the pics crap focusing today ?

this one is just in the engine bay coming up the bulkhead

http://www.rs2000.plus.com/engine/clip1.JPG


this ones on the chassis rails under the car

http://www.rs2000.plus.com/engine/clip.JPG

hope that helps ?
Brian
scoobydoo
30-09-2004, 18:31
Thanks mate,be prepared for more silly questions during the rebuild!


Cheers
Kenny
RS2000CUSTOM
30-09-2004, 18:42
right heres what I have sorry for the pics crap focusing today ?

this one is just in the engine bay coming up the bulkhead

http://www.rs2000.plus.com/engine/clip1.JPG

hope that helps ?
Brian

That one is for the speedo cable
GAZ W
30-09-2004, 19:15
bloody hell, Brian! You've got a manual?!!!! Send it to GazW, quick!

Believe it or not i do actually own the haynes manual for the RS2000 and a supplement manual i got off ebay for the mex/RS2000
GAZ W
30-09-2004, 19:17
Thanks mate,be prepared for more silly questions during the rebuild!


Cheers
Kenny


Oi oi if theres any silly question asking to be done its done by me
Banishit
30-09-2004, 19:36
Thanks mate,be prepared for more silly questions during the rebuild!


Cheers
Kenny


Oi oi if theres any silly question asking to be done its done by me

no no you cant monoplise the silly questions market, we have to share them

and mine is not a Haynes manual its a Ford proper workshop
GAZ W
30-09-2004, 20:06
Banishit

Is that manual still available from anywhere ?
Chesney
30-09-2004, 20:20
I got mine from Burton's nearly 2 years ago, i bet they can still get em. Personally i find the haynes manual better for some aspects and the ford one for others.
Chesney
30-09-2004, 20:22
While we're on the subject of silly questions being asked, what happened to LeeAdams who used to be on here, he was always asking something but seems to have disappeared of late?
GAZ W
30-09-2004, 20:38
Didnt he sell the mk2 and get an escort cossie intstead?
bigjohnie
02-10-2004, 15:42
that broken ones for the speedo cable .i think i have a new one brian.drop me a note and i will post it to you.