Another can you still get question

[GAZ W]

I know i ask a lot of these "can you still get" questions , but i need to know if you can still get all the clips that fit onto a pinto rocker cover ??

[Banishit]

which the ones for holding the plug leads ?

[GAZ W]

Yes mate , the plug lead one and any others that should be there .
there has never been any clips on my rocker cover but loads of holes there for clips , what else clips to the rocker cover?

[Banishit]

theres four along the side for holding the leads above the plugs and if you got a newer cover theres another clip with four slots in ontop of the cover for holdong the leads from the dizzy to the side clip if that makes sense, but that cover is from a lot newer car, the original is a u shaped piece of steel bent towards the cam pullys that a rubber, lead holder goes into this boys got a water pipe stuck in it

http://www.kteamtrivia.co.uk/Motorsport/Ford_Escort_Mk1/Escort_Mk_1_Specification/engine.jpg

then 2/3's of the way down is the small L shaped bracket for holding the air filter on I cant think of anything else though?

Brian

sorry dont know if they are avaiable but Im sure they could be salvaged from a scrappies, they tended to perish and then break as there only rigid plastic whitish in colour

[GAZ W]

i see now there is one clip for each lead just above the plug :geek:

i thought something ran along the side of the cover :geek:


ive got the rubber jobbie that goes into the u shaped clip on the top i will have to source some of the clips now

cheers